B
Accessories
All the tools you need
BB15-MK3 Cover
$220–$245
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Grille forward or up, 1 round handle cut-out per side, flap over control panel, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
DJ18S-MK3 Wheel Cart
$95
For the DJ18S-MK3-NCM (no caster mounts). Check the SKU on your cabinet's label.
- 18 mm Baltic birch, polyurea coated. Fits onto the back of the cabinet; the sub rolls on its back. 4 locking casters. Rated to 600 lb. The DJ18S-MK3 (with caster mounts) takes casters instead of this cart.
- Check the SKU on your cabinet's label.
- DJ18S-MK3: has caster hardware, so you don't need the cart. Get casters here.
- DJ18S-MK3-NCM: no caster hardware. This cart is for you.
- Not sure? Call us at 855-822-7770.
DJ18S-MK3 Cover
$290–$320
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. One round handle cut-out per side, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
SSP118-MK3 Horizontal Wheel Cart
$295
Carries up to 3 SSP118-MK3 cabinets, horizontal.
- 18 mm Baltic birch, polyurea coated. Foot pockets accept the cabinet feet. 4 handles. 4 heavy-duty locking casters. Rated to 1,400 lb.
SSP118-MK3 Cover
$245–$530
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Grille forward, 2 handles per side, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
VS21-MK3 Vertical Wheel Cart
$295
Carries 1 VS21-MK3 cabinet, upright.
- 18 mm Baltic birch, polyurea coated. Sockets accept the cabinet feet. 4 locking casters. Rated to 1,400 lb.
VS21-MK3 Horizontal Wheel Cart
$395
Carries up to 3 VS21-MK3 cabinets, horizontal.
- 18 mm Baltic birch, polyurea coated. Sockets accept the cabinet feet. 4 locking casters.
VS21-MK3 Cover
$410–$665
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Upright, grille forward, 4 handle cut-outs, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
SSP215-MK3 Cover
$280–$310
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Grille forward, 2 handles per side, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
SSP218-MK3 Horizontal Wheel Cart
$395
Carries up to 4 SSP218-MK3 cabinets. Also fits SSP215-MK3.
- 18 mm Baltic birch, polyurea coated. Foot pockets accept the cabinet feet. 7 handles. 4 heavy-duty locking casters. Loaded footprint 29.5 x 48 in. Rated to 1,400 lb.
SSP218-MK3 Cover
$310–$580
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Grille forward, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
ZV28-MK3 Vertical Wheel Cart
$295
Carries 1 ZV28-MK3 cabinet, upright.
- 18 mm Baltic birch, polyurea coated. Foot pockets accept the cabinet feet. 4 locking casters.
ZV28-MK3 Horizontal Wheel Cart
$395
Carries up to 4 ZV28-MK3 cabinets, horizontal.
- 18 mm Baltic birch, polyurea coated. Sockets accept the cabinet feet. 4 heavy-duty locking casters. Rated to 1,400 lb.
ZV28-MK3 Cover
$425–$470
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Grille up, Velcro split, 2 handles per side, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
Makara-MK3 Vertical Wheel Cart
$395
Carries 1 Makara-MK3 cabinet, upright.
- 18 mm Baltic birch, polyurea coated. Recesses accept the UHMW cabinet sliders. 4 locking casters. Rated to 1,400 lb.
Kraken-MK3 Horizontal Wheel Cart
$395
Carries 1 Kraken-MK3 plus 1 Makara-MK3, horizontal.
FitsKrakenMakaraKrakatoa
- 18 mm Baltic birch, polyurea coated. Recesses accept the cabinet sliders. 4 locking casters. Rated to 1,400 lb.
Makara-MK3 Cover
$410–$455
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Two handle cut-outs per side, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
Kraken-MK3 Cover
$705–$780
FitsKrakenKrakatoa
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Two handle cut-outs per side, Velcro split, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
SV9-MK3 Cover
$200–$220
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. 2 rear handle cut-outs, bottom flap, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
CCM12-MK3 Cover
$210–$230
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Side flap, handle cut-outs, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
DiaMon-MK3 Cover
$220–$245
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Carry bag, loop handles, Velcro closure, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
DV12 Stack Bracket Kit
$225
Factory-designed bracket kit for inverting and locking two BASSBOSS DV12s into a vertical array, ideal for clubs, installs, and directional control. Powder-coated steel mounting plates with integrated slots and fasteners enable fast, phase-coherent coupling between cabinets. Deploys on the ground or in a truss-mounted build in minutes.
DV12-MK3 Cover
$185–$230
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Top and bottom rear handle cut-outs, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
Attuned12 Cover
$210–$255
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. 6 handle cut-outs for four total handles, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
AT212-MK3 Cover
$285–$315
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. 4 handle cut-outs, 2 per side, Velcro seam, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
AT312-MK3 Cover
$285–$315
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. 4 handle cut-outs, 2 per side, Velcro seam, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
MFLA Flybar
$1,995
Purpose-built rigging hardware for flying the MFLA-MK3 in vertical array configurations. Required for flown installations.
MFLA-MK3 Aluminum Transport Cart
$1,895
Roll up to 5 MFLA-MK3 elements on a single aluminum cart. Doubles as a ground-stack deployment base.
MFLA-MK3 Cover (4-high stack)
$850–$940
Protect your gear with our heavy-duty covers. Built to survive abuse!
- F1 Maximum Protection
- BASSBOSS covers are American-made from highest-protection F1 1,000 denier Cordura nylon: abrasion resistant and water repellent. Inside, a lightweight, impact-resistant foam layer is bonded to a soft tricot lining that won't scuff your cab. Velcro seam, two handles per side, pack cloth inside sides, two cut-outs top front for rigging points, finished with an embroidered BASSBOSS logo.
- Padding: F1 1/2″ foam · F2 1/4″ foam
- Exterior: 1,000 denier Cordura nylon, F1 and F2
- Lining: nylon tricot bonded to the foam, F1 and F2
- Water repellency: coated exterior, F1 and F2
Ships in three to four weeks.
Sublim8 Trunc8 Spacer
$295
The optional short spacer. Swap it for the standard spacer and the column drops from about 9 ft to just over 7 ft: better for seated audiences and stage placement.
Sublim8 Lighting Bracket
$95
The Sublim8 Lighting Bracket is an accessory for the Sublim8 that allows for mounting a moving head lighting fixture atop the unit.
- Dims (H × W × D)23 mm × 180 mm × 40 mm (0.91" × 7.09" × 1.58")
- Weight173 g
- SKUBB-SUBLIM8-LT-BRKT
K&M 21366 Ring Lock Distance Rod, adjustable 39.5–58.5″
$195
FitsDV12CCM12SV9Attuned12DiaMonBB15SSP118DJ18SVS21
K&M 21360 Ring Lock Distance Rod, fixed 30″
$125
FitsDV12CCM12SV9Attuned12DiaMonVS21SSP215SSP218ZV28Makara
K&M 21364 Ring Lock Distance Rod, steel
$85
Threaded M20 bottom. Needs the K&M 24116 plate in your sub’s pole cup.
FitsDV12CCM12SV9Attuned12DiaMonBB15SSP118DJ18S
K&M 21447 Ring Lock Distance Rod, short steel
$75
Threaded M20 bottom. Needs the K&M 24116 plate in your sub’s pole cup.
FitsDV12CCM12SV9Attuned12DiaMon
K&M 21467 Speaker Stand / Tripod, Ring Lock
$265
FitsDV12CCM12SV9Attuned12DiaMon
K&M 26737 Ring Lock Speaker Stand, Flat Base
$285
FitsDV12CCM12SV9Attuned12DiaMon
K&M 19500 Speaker Stand, 4-leg
$235
FitsDV12CCM12SV9Attuned12DiaMon
K&M 21441 Ring Lock Adapter Sleeve
$85
FitsDV12CCM12SV9Attuned12DiaMon
K&M 19674 Ring Lock Tilt Adapter
$115
Attuned12 (55 lb) is at this mount’s 25 kg (55 lb) maximum rated load.
FitsCCM12SV9Attuned12DiaMon
K&M 24110 Speaker Wall Mount
$125
FitsSV9CCM12Attuned12DiaMon
K&M 24120 Speaker Wall Mount, swivel
$255
FitsSV9CCM12Attuned12DiaMon
K&M 24169 Speaker Wall Mount, low profile
$105
Attuned12 (55 lb) is at this mount’s 25 kg (55 lb) maximum rated load.
FitsSV9CCM12Attuned12DiaMon
K&M 19665 Flange Adapter (35 mm / Ring Lock pole cup)
$35
FitsDV12CCM12SV9Attuned12DiaMonBB15SSP118DJ18SVS21SSP215SSP218ZV28Makara
K&M 24116 Connector Plate (M20 threaded pole cup)
$15
FitsDV12CCM12SV9Attuned12DiaMonBB15SSP118DJ18SVS21SSP215SSP218ZV28Makara
